Control unit information

Online SRS Airbag repair service and crash data clearing for Mitsubishi ENDEAVOR airbag control unit with the part number MR587533 DPSB W2T62274. You can reset airbag control unit and remove the stored crash data online if your airbags have deployed. It will allow you to reuse the unit without having to buy an expensive new SRS module from the dealer. The airbag control module will function and operate exactly as it did prior to the airbag light coming on, leaving you with a safe airbag control/restraint system.

The SRS Airbag System is designed to supplement the seatbelt system and improve occupant protection in certain type of crushes. Air bags and air bag control units are designed to only work once. Our online service will clear the existing crash/error data so control unit can be used again. Airbag control unit will function as new and erasing the crash data will cost much less than the cost of a new unit.

You can use CarSoftRepair online service if your car airbag system has any of the following symptoms:

• airbags have deployed
• airbag errors due to a discharged or flat battery
• airbag errors by jump starting attempts
• airbag light is flashing or constantly on
• diagnostic tool is reading Crash Data Stored, Crash Recorded, ECU error, etc.

Important! If your air bags have deployed, obviously, they need to be replaced with un-deployed air bags but the original airbag ECU can now be repaired and cleared of all its crash data.

Please note if you have not had an accident and for some reason, your vehicle indicates an airbag system fault, then it can be an internal airbag control unit error.